Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Scenario 1: FWG114P v2 to FWG114P v2 with Preshared Secrets

Note: This scenario assumes all ports are open on the FWG114P v2. You can verify this by reviewing the security settings as seen in the “Rules menu” on page 6-5.

 /$1,3

*DWHZD\$

+Á.?wjËoåÔ±¤¤~Ë8‰ÁjjÄÄˉÁjÝ?Ê+Á‰™ÍË.jÁÜjÁ8¤¤+

6FHQDULR



:$1,3 :$1,3

*DWHZD\%

+Á.?wjËoåÔ±¤¤~Ë8‰ÁjjÄÄˉÁjÝ?Ê+Á‰™ÍË.jÁÜjÁ8¤¤+

 /$1,3

Figure 8-11: LAN to LAN VPN access from an FWG114P v2 to an FWG114P v2

Use this scenario illustration and configuration screens as a model to build your configuration.

1.Log in to the FWG114P v2 labeled Gateway A as in the illustration.

Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password, or using whatever password and LAN address you have chosen.

2.Configure the WAN (Internet) and LAN IP addresses of the FWG114P v2.

a.From the main menu Setup section, click on the Basic Setup link.

WAN IP addresses

ISP provides these addresses

Figure 8-12: FWG114P v2 Internet IP Address menu

b.Configure the WAN Internet Address according to the settings above and click Apply to save your settings. For more information on configuring the WAN IP settings in the Basic Setup topics, please see “Manually Configuring Your Internet Connection” on page 3-18.

8-20

Virtual Private Networking

201-10301-02, May 2005

Page 132
Image 132
NETGEAR manual Scenario 1 FWG114P v2 to FWG114P v2 with Preshared Secrets