NETGEAR FWG114P v2 manual VPN Auto Policy fields are defined in the following table

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

The VPN Auto Policy fields are defined in the following table.

Table 8-1.	VPN Auto Policy Configuration Fields
Field		Description
General		These settings identify this policy and determine its major characteristics.
Policy Name		The descriptive name of the VPN policy. Each policy should have a unique
		policy name. This name is not supplied to the remote VPN endpoint. It is
		only used to help you identify VPN policies.
IKE Policy		The existing IKE policies are presented in a drop-down list.
		Note: Create the IKE policy BEFORE creating a VPN - Auto policy.
Remote VPN Endpoint		The address used to locate the remote VPN firewall or client to which you
		wish to connect. The remote VPN endpoint must have this FWG114P v2’s
		Local IP values entered as its “Remote VPN Endpoint.”
		• By its Fully Qualified Domain Name (FQDN) — your domain name.
		• By its IP Address.

Address Type The address type used to locate the remote VPN firewall or client to which you wish to connect.

•By its Fully Qualified Domain Name (FQDN) — your domain name.

•By its IP Address.

Address Data The address used to locate the remote VPN firewall or client to which you wish to connect. The remote VPN endpoint must have this FWG114P v2’s Local Identity Data entered as its “Remote VPN Endpoint.”

•By its Fully Qualified Domain Name (FQDN) — your domain name.

•By its IP Address.

SA Life Time	The duration of the Security Association before it expires.
	• Seconds - the amount of time before the SA expires. Over an hour is
	common (3600).
	• Kbytes - the amount of traffic before the SA expires.
	One of these can be set without setting the other.
IPSec PFS	If enabled, security is enhanced by ensuring that the key is changed at
	regular intervals. Also, even if one key is broken, subsequent keys are no
	easier to break. Each key has no relationship to the previous key.
PFS Key Group	If PFS is enabled, this setting determines the DH group bit size used in the
	key exchange. This must match the value used on the remote gateway.

Virtual Private Networking 8-7

201-10301-02, May 2005