NETGEAR FWG114P v2 Getting E-Mail Notifications of Event Logs and Alerts, Setting the Time Zone

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Note: Enter the values in 24-hour time format. For example, 10:30 am would be 10 hours and 30 minutes and 10:30 pm would be 22 hours and 30 minutes.

Be sure to click Apply when you have finished configuring this menu.

Setting the Time Zone

The FWG114P v2 Wireless Firewall/Print Server uses the Network Time Protocol (NTP) to obtain the current time and date from one of several Network Time Servers on the Internet. In order to localize the time for your log entries, you must specify your Time Zone:

•Time Zone. Select your local time zone. This setting will be used for the blocking schedule and for time-stamping log entries.

•Daylight Savings Time. Select this check box for daylight savings time.

Note: If your region uses Daylight Savings Time, you must manually select Adjust for Daylight Savings Time on the first day of Daylight Savings Time, and unselect it at the end. Enabling Daylight Savings Time will add one hour to the standard time.

Be sure to click Apply when you have finished configuring this menu.

Getting E-Mail Notifications of Event Logs and Alerts

In order to receive logs and alerts by e-mail, you must provide your e-mail information in the E-Mail subheading:

Firewall Protection and Content Filtering 6-13

201-10301-02, May 2005