Using Wi-Fi

Making Camera Settings from a Web Browser

You can change the camera settings from a web browser.

1Tap “MENU”.

(Operation on this camera)

PLAYREC MENU

.

0The shortcut menu appears.

2Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)

MENU

.

3Tap “NETWORK SETTINGS”. (Operation on this camera)

Wi-Fi

NETWORK SETTINGS

.

4Tap “SET FROM WEB BROWSER”. (Operation on this camera)

NETWORK SETTINGS

SET FROM WEB BROWSER

.

5Check the SSID and PASS shown on the camera’s screen, then register them on the computer to connect.

(Operation on this camera)

SET FROM WEB BROWSER

CONNECT USING Wi-Fi

SSID:********************************

PASS:********************************

********************************

QUITWPS

.

0When the computer is connected to the camera, a URL appears on the camera.

6Check the URL shown on the camera’s screen, then enter it on the Internet Explorer (web browser).

(Operation on this camera)

SET FROM WEB BROWSER

CHANGE SETTING BY CONNECTING

TO THE FOLLOWING URL

FROM YOUR WEB BROWSER

http://***.***.***.***:*****/

QUIT

.

0To exit, tap “QUIT”.

You can change the Wi-Fi function of the camera from a web browser.

“Adding/Changing/Deleting an Access Point” (A p. 53)

OUT MONITORING SET ” (A p. 54)

Wi-Fi DIRECT SETTING ” (A p. 54) “Mail Setting” (A p. 54)

52

Page 52
Image 52
JVC LYT2473-002A manual Making Camera Settings from a Web Browser, Tap SET from WEB BROWSER. Operation on this camera