Troubleshooting
Card
Cannot insert the SD card.
Make sure not to insert the SD card in the wrong direction. “Inserting an SD Card” (A p. 65)
Unable to copy to SD card.
To use SD cards that have been used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from media settings.
“ FORMAT SD CARD ” (A p. 205)
Playback
Sound or video is interrupted.
Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction.
There is no sound.
When the Silent mode is used, operation and playback sounds will not be output. Turn off the Silent mode.
“ SILENT MODE ” (A p. 199)
Set “OPERATION SOUND” in the common menu to “ON”. “ OPERATION SOUND ” (A p. 199)
Audio sound is not recorded for videos taken in HIGH SPEED RECORDING/
“Recording at Intervals
The same image is displayed for a long time.
Use a high speed SD card (Class 4 or higher). “Types of Usable SD Card” (A p. 66)
Clean the terminals of the SD card with a dry cotton swab or something similar.
Execute “FORMAT SD CARD” in the “COMMON” menu. (All data will be deleted.)
“ FORMAT SD CARD ” (A p. 205)
The motion is choppy.
Use a high speed SD card (Class 4 or higher). “Types of Usable SD Card” (A p. 66)
Clean the terminals of the SD card with a dry cotton swab or something similar.
Execute “FORMAT SD CARD” in the “COMMON” menu. (All data will be deleted.)
“ FORMAT SD CARD ” (A p. 205)
Verify the system requirements of your computer when using Everio MediaBrowser to play back.
“Verifying System Requirements (Guideline)” (A p. 160)
Cannot find a recorded file.
Cancel the date search function.
“Searching for a Specific Video/Still Image by Date” (A p. 125) Select “PLAYBACK OTHER FILE” in the menu. (Video files that have damaged management information can be played back.)
“Playing a Video with Defective Management Information” (A p. 122) Images recorded in 60p mode and 60i mode are displayed on the index screen separately. To view videos recorded in the 60p mode or 60i mode, set “SYSTEM SELECT” to “60p” or “60i” respectively, followed by setting to the playback mode.
“ SYSTEM SELECT ” (A p. 179)
Images do not appear on the TV properly.
Disconnect the cable and connect again. “Connecting via the HDMI Mini Connector” (A p. 126) Turn off and on this unit again.
Images are projected vertically on the TV.
Set “VIDEO OUTPUT” in the “COMMON” menu to “4:3”.
“VIDEO OUTPUT ” (A p. 203) Adjust the TV's screen accordingly.
The image displayed on TV is too small.
Set “VIDEO OUTPUT” in the “COMMON” menu to “16:9”. “ VIDEO OUTPUT ” (A p. 203)
When connected to the TV via the HDMI mini cable, proper images and sounds are not output.
Images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.
A Disconnect the HDMI mini cable and connect it again.
