Using Wi-Fi
Adding/Changing/Deleting an Access Point
To search and add “ACCESS POINTS”
1Click “Access Point”.
.
2Click “SEARCH”.
.
3Click on the access point you want to add.
.
0Click “SEARCH AGAIN” to perform search for an access point again. 4 Enter the password, and click “REG.”.
. 
0Password entry is not required if the access point is security protected.
5Click “OK”.
.
To add “ACCESS POINTS” manually
1Click “Access Point”.
.
2Click “ADD”.
.
3Enter “SSID”, “TYPE OF SECURITY”, and “PASSWORD”, and click “REG.”.
.
.
0To configure the LAN settings manually, set “DHCP” to OFF, and enter the necessary information manually.
4Click “OK”.
.
To change (or delete) an “ACCESS POINTS” registration
1Click “Access Point”.
.
2Click on a registered access point.
53
