Toshiba DKA-UG-DKSLT-VB manual Direct Inward System Access Disa, To cancel CO Line Queuing

Features

Direct Inward System Access (DISA)

➤To cancel CO Line Queuing

➤Lift the handset and press ￿￿￿

...or press /LQH +

￿￿￿.

Confirmation tone is heard.

Direct Inward System Access (DISA)

Outside callers with telephones that send Dual-tone Multi-frequency (DTMF) tones (push-button dialing) can call in on CO lines programmed for DISA and dial stations or outgoing CO lines without going through an attendant or operator.

1.From outside the system, call the DISA CO line phone number:___-______.

See the System Administrator for this number.

2.Listen for the repetitive ringback tone signal, followed by dial tone.

Try again if you hear busy tone.

3.During the 10 secs. of dial tone, make your call.

If a number is not dialed, the system automatically causes the DISA CO line to ring at telephones as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts it disconnects.

To call another station after completing a DISA station call, the internal party must transfer you. Station Paging and System Paging cannot be made on DISA calls.

Strata DK Digital Single Line Telephone 5/99 27