Features
Message Waiting
Retrieve a Call on Hold
➤Press /LQH again.
If a call is not retrieved by a certain time (set in system programming), it recalls back to your phone. You hear repeated recall tone (or if you are on the phone, you hear recall tone twice).
If the held party hangs up, the call is released and the CO provides a
Retrieve a Call on Exclusive Hold
➤Press /LQH again.
If a call is not retrieved by a certain time (set in system programming), it recalls back to your phone. You hear repeated recall tone (or if you are on the phone, you hear recall tone twice).
If the held party hangs up, the call is released and the CO provides a
Message Waiting
If your station is idle or busy on a call while another station tries to contact you, the calling station can turn on the message waiting LED on your telephone. Your Message Waiting lamp flashes when there is a message.
When you respond by pressing 0VJ, you will either hear a voice message or your phone will dial the telephone which set a callback message. Voice mail devices and stations can leave message waiting indications.
Up to four Message Waiting indications can be left at a station at one time. One of the indications is for the Message Center.
➤To answer a Message Waiting light
1.Lift the handset and press 0VJ.
...or lift the handset and press /LQH +
.
You hear dial tone after lifting the handset.
Your phone rings the device that set the indication. If there is no answer, hang up and try later. (The LED continues to flash.)
32 | Strata DK Digital Single Line Telephone 5/99 |
