Features
Call Forward (CF)
➤To change the destination number
1.Call into the Strata DK system over a CO line programmed for the DISA feature.
2.After you hear dial tone, press, then enter a [PDN].
3.Enter the Remote Call
4.Enter the new destination number.
You can enter an internal [PDN], or a CO or Tie line access code + an external telephone number.
With some systems, you can dial a line group code instead of a CO line number access code (see Table 4 on Page 46).
You cannot enter the LCR access code
You hear ring back tone signal, then internal dial tone for 10 seconds. Try again if you hear busy tone.
Note See the System Administrator for DISA telephone numbers.
You hear a confirmation tone.
If a number is not dialed, the system automatically causes the DISA CO line to ring at telephones as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System Administrator for the access code.
Strata DK Digital Single Line Telephone 5/99 | 19 |
