Using
Setting the Enforced Group Owner (DIRECT MONITORING)
Sets whether to enforce authorization of the group owner.
1Tap “MENU”.
(Operation on this camera)
≪PLAYREC MENU
.
0The shortcut menu appears.
2Tap
MENU
.
3Tap “NETWORK SETTINGS”. (Operation on this camera)
NETWORK SETTINGS
.
4Tap “Wi-Fi DIRECT SETTING”. (Operation on this camera)
NETWORK SETTINGS
.
5Tap “ENFORCED GROUP OWNER”. (Operation on this camera)
ENFORCED GROUP OWNER
SET
.
0Tap “ON” or “OFF”.
0It is recommended to select “ON” usually.
If connection to devices that support
0After setting, tap “SET”.
Memo :
0When set to “OFF”, connection to devices that do not support
Checking the MAC Address of this Camera
Displays the MAC address of the camera.
1Tap “MENU”.
(Operation on this camera)
≪PLAYREC MENU
.
0The shortcut menu appears.
2Tap
MENU
.
3Tap “NETWORK SETTINGS”. (Operation on this camera)
NETWORK SETTINGS
.
4Tap “MAC ADDRESS”. (Operation on this camera)
NETWORK SETTINGS
MAC ADDRESS
.
0The MAC address of the camera appears.
(The above shows the MAC address when connected to an access point, while the below shows the address during direct connection.)
0After setting, tap “SET”.
42