Multitech MT128ISA-SD, MT128ISA-SV, MT128ISA-UV, MT128ISA-UD manual Features

Introduction/Description

Your internal ISDN PC card is compatible with prevalent ISDN switch protocols. It communicates using ISDN BRI (2B+D) service, which provides up to 128K bps data communications.

This manual documents the following models:

•MT128ISA-SD for ST interface no POTS port

•MT128ISA-SV for ST interface with one POTS port

•MT128ISA-UD for U interface no POTS port

•MT128ISA-UV for U interface with with one POTS port

All of the current analog devices, including telephone set, G3 fax, answering ma- chine, modem, and PBX trunk line, can be connected to the POTS port via an RJ- 11 jack in “V” models.

This owner’s manual will help you install, configure, and operate your TA.

1.2Features

Your internal ISDN PC card features include:

•D Channel protocols. Including AT&T 5ESS, Nortel DMS-100, US NI-1 & NI2, ETSI, Japan INS-64

•B Channel protocols. Including HDLC, X.75, V.120, and voice (V models)

•ISDN BRI (2B+D) and analog ports.

•Supports Application Interfaces including WinISDN, CAPI 2.0, Windows Comm (AT command/S-Registe/Result Codes) and NDISWAN Miniport.

•Automatic detection of incoming calls as voice or data (V models).

•Supports Windows 3.1, Windows 95 (OSR-2), and Windows NT Multilink PPP connection.

•Supports Microsoft ISDN Accelerator Pack.

•PnP compatibility with 16 bits address decoding.

•Ability to use the same communications software as analog modems

•Provides On-line test and Diagnostics tools.

8-IWay Hopper