Installation
Figure 2-29. Configure Port Usage Installation
14.If you choose “Dial out only”, click OK, and then click the Network tab, and check which protocol you want. If you are going to access Internet, choose “TCP/IP”.
Figure 2-30. Configure Dial Out Protocol
15.If you choose “Receive calls”, or “Dial out and Receive calls”, click OK and then click the Network tab, you will get a window like below. Please check your ISP or network administrator for TCP/IP settings (see Appendix B for assistance). Also check that you have enabled, “allow any authentication including clear text”, in the Security settings. Then click OK.
