JVC VR-509E instruction manual Setup Commands

RS-232C Interface

3. Details of the Commands (continued)

3.3.Setup Commands

•DOWN (63H) [JVC-1]

•RIGHT (64H) [JVC-1]

•	LEFT	(68H) [JVC-1]
•	UP	(69H) [JVC-1]

Shifts the parameter settings when the timer PRG and the alarm search parameters have been set.

Shifts the selection fields with the [UP] and [DOWN] keys when the menu is being displayed.

•Vol +, – (65H, 66H) [JVC-1]

Changes the set values with + (ascending) and – (descending).

•SEQ (6AH) [JVC-1]

Changes the monitor output screen mode.

•MENU ON (6BH) [JVC-1] Displays the menu.

•MENU OFF (6CH) [JVC-1] Clears the menu.

•MENU ON/OFF (6CH) [JVC-1] Switches between menu displays/clear.

•ON SCREEN SELECT (74H) [JVC-1]

	1st byte 2nd byte
TXD
		74H
RXD
			0AH	0AH

Switches the contents displayed on screen (REMAIN display is not performed when loop recording is set at ON.)

Second byte

Bit	Status	Detail
7	1 / 0	Stop recording notification	: 1( ON ) / 0( OFF )
6	1 / 0	Warning display	: 1( ON ) / 0( OFF )
5	1 / 0	Camera title display	: 1( ON ) / 0( OFF )
4	1 / 0	Mode display	: 1( ON ) / 0( OFF )
3	1 / 0	Remaining capacity display : 1( ON ) / 0( OFF )
2	1 / 0	Alarm detection display	: 1( ON ) / 0( OFF )
1	1 / 0	Alarm count display	: 1( ON ) / 0( OFF )
0	1 / 0	Date/time display	: 1( ON ) / 0( OFF )

•CANCEL (76H) [JVC-1]

Cancels the program data on the program timer setup screen.

•HDR PB CAMERA SET (86H) [JVC-1]

Specifies the playback camera. The monitor output camera is specified during recording.

	1st byte 2nd byte 3rd byte
TXD
		86H
RXD
			0AH	0AH	0AH

Second byte

Bit	Status		Detail
7 to 4	Fixed at “3”
	0 / 1 / 2	0: FULL size specification / 1: FULL size sequential display
3 to 0	3 / 4 / 5	2: 4-screen specification	/ 3:	4-screen sequential display
	6	5: 6-screen specification	/ 6:	9-screen specification

*FULL size sequential display, 4-screen sequential display and 6-screen specification are invalidated when in the playback mode (include when recording and playback are performed at the same time.)

*The FULL size sequential display ⇔ 4-screen sequential display specifications are invalid.

		Third byte
Bit	Status	Detail
7 to 4	Fixed at “3”
		Second BYTEF: During FULL size specification
		8: Camera 9 specification to 0: Camera 1 specification
		Second BYTEF: During 4-screen specification
3 to 0	8 to 0	2: Pattern C
		1: Pattern B
		0: Pattern A
		Values that do not correspond to each setting are
		invalidated.

*Invalid with Second Byte: FULL size sequential display, 4-screen sequential display, 6-screen screen and 9- screen specifications.

•DATE SET(8EH) [BASIC/JVC-1]

Sets the month, day and year in the VR-509E.

(Cannot be set when the NTP Client function is enabled, or when the VR-509E is in the recording mode.)

			Month			Day			Year
TXD
	8EH
RXD
		0AH		0AH	0AH		0AH	0AH		0AH	0AH

•TIME SET(8FH) [BASIC/JVC-1]

Sets the hours, minutes and seconds in the VR-509E. (Cannot be set when the NTP Client function is enabled, or when the VR-509E is in the recording mode.)

			Hours			Minutes			Seconds
TXD
	8FH
RXD
		0AH		0AH	0AH		0AH	0AH		0AH	0AH

•MENU RESET (EFH) [JVC-1] Initializes the menu setup values.

(Cannot be set when the VR-509E is in the recording mode, or when the operation lock has been activated.)

118