JVC VR-509E REC and Play buttons do, Not work, Playback image is not, Displayed on the monitor

Explanations

Troubleshooting (continued)

Other Problems

Onscreen Display		Cause and Recovery	Refer to
			Page
Power cannot be turned on.	→ Check to ascertain that the power cable has been plugged in correctly.		–
[REC] and [PLAY] buttons do	→ Check to ascertain if the OPERATION LOCK is activated.		P48
not work.	→ Check to ascertain if the TIMER STANDBY mode is activated.		P38, P39
Playback image is not	→ Check the monitor connection.		P15
displayed on the monitor.	→ Select a camera that has a recorded image.		P41
Unable to start program	→ Check the DATE/TIME settings.		P19
recording using the Program	→ Check to ascertain if the TIMER STANDBY mode is activated.		P38
Timer	→ Check the TIMER PROGRAM.		P39
Menu screen is not displayed.	→ Check to ascertain if the OPERATION LOCK is activated.		P48
	→ Check to ascertain if the TIMER STANDBY mode is activated.		P38
No onscreen display of date/	→ Check to ascertain that the settings on the “ONSCREEN DISPLAY		P25
time and title.		SETTINGS” screen are set to “ON”.
Date/Time is not recorded.	→ Check the DATE/TIME settings.		P19
[TIMER] indicator blinks.	•	The PROGRAM TIMER has not been reserved, or there is no recording
		reservation that can be executed.
	→ Check the PROGRAM TIMER.		P38, P39
	•	There is no space left on the hard disk.
	→ Format the hard disk to create recording space or set Repeat REC to		P51, P32
		values other than “OFF”.
Unable to play back audio	→ Make recordings with the “AUDIO REC” in the “DETAIL REC” menu set		P30, P31
sound.		to “ON”.
	* Sound audio cannot be recorded when the “F.RATE” setting on the
	“OPERATION SET” menu has been specified as “0.08” or “0.2”.
Unable to execute Skip Jump	→ Check the DATE/TIME setting.		P19
or Direct Jump	→ Check the SKIP setting.		P44
Cannot mount rack fittings	→ Rack mount fittings are optional. Please consult the nearest JVC dealer		–
		for details.

99