JVC VR-509E instruction manual Split Picture, Onscreen Mode, Division a, Division B, Division C

SPLIT PICTURE

Sets whether or not to display each screen with automatic switching when in the split picture mode.

1.Press the [MENU] button.

• The [MENU] → [DETAIL OPERATION] → [MONITOR]

→ [SPLIT SCREEN] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

	SPLIT PICTURE
4 DIVISION
4 DIVISION-A	ENABLE	2.
4 DIVISION-B	ENABLE
4 DIVISION-C	ENABLE

Viewing Live Camera Images

ONSCREEN MODE

Sets whether or not each of the settings are to be displayed during the ONSCREEN mode.

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [DISPLAY/ OPERATIONS] → [ONSCREEN MODE] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

ONSCREEN MODE
DATE/TIME	ON
ALARM COUNT	ON
ALARM DETECT	ON
DISK CAPACITY	ON	2.
PLAYBACK SET	ON
CAMERA TITLE	ON
WARNING	ON
REC TO STOP MESSAGE	ON

2.Select your desired item with the [S/T] keys, and then change the value of the setting with [–/+].

Settings

4 DIVISION A

DISABLE: Skipped.

ENABLED:Displayed.

4 DIVISION B

DISABLE: Skipped.

ENABLED:Displayed.

4 DIVISION C

DISABLE: Skipped.

ENABLED:Displayed.

3.Press the [SET] button.

• The confirmation screen will be displayed.

4.Select [SAVE] with the [W/X] keys, and then press [SET].

2.Select your desired item with the [S/T] keys, and then change the value of the setting with [–/+].

Settings

•DATE/TIME: Displays the date and time.

•ALARM COUNT:

Displays the alarm number (displayed as AL-**.) The most recently recorded alarm number will be displayed for live images.

The alarm number for the recording being played back will be displayed when playing pack ALARM REC images.

•ALARM DETECT:

-AL- will be displayed in red when an alarm is triggered.

•DISK CAPACITY:

Displays the remaining disk capacity when the [REPEAT REC] parameter has been set at OFF (displayed as **%).

The remaining disk capacity will not be displayed when the [REPEAT REC] parameter is set at “AL” or “ALARM LOCK”.

•PLAYBACK SET:

Displays the playback mode ( or , etc.,) and the operation status (blue circle, etc.)

•CAMERA TITLE:

Displays the camera title that corresponds with the camera that is currently set.

*The camera title will not be displayed for camera playback images that have been deleted after recording.

•WARNING:

The on-screen warning and LED warning displays when a warning is triggered. (Example: MAINTENANCE PROCEEDING.)

•REC TO STOP MESSAGE:

The “The record stopped” on-screen display and LED warning display.

Values

ON: Displayed.

OFF: Not displayed.

3.Press the [SET] button.

• The confirmation screen will be displayed.

4.Select [SAVE] with the [W/X] keys, and then press [SET].

* DISK CAPACITY display:

25