JVC VR-509E instruction manual Exporting Data on DVD, Time/Date, Delete Method, Export Form

Exporting Data on DVD

The VR-509 is equipped with a function to enable the images stored on the hard disk to be exported to DVDs.

*It is possible to export images to a DVD when recording onto the hard disk.

1.Press the [HDD(DVD)] button.

• The display LED will be illuminated, and the DVD

operation mode will be activated.

*It is not possible to switch across to the DVD operation mode during HDD playback.

2.Press the [MENU] button.

• The “DVD” screen will be displayed.

Using DVD

DVD-Video (NO OPT) format:

The copy is made in the DVD-Video format. This can be played back on DVD players. Gaps between images caused by a low number of frames per second are played back in the fast-forward mode. This format cannot be played back on the VR-509.

Only Self Playing:

The copy is made in a format that can only be played back on the VR-509.

*To output linked audio sound in the DVD-Video format, either set the [GAP FILL-IN (OPT)] parameter, or specify “25” for the frame rate.

If the frame rate is set at 0.08 or 0.2, audio sound will not be output even if the [GAP FILL-IN] parameter is set up.

DVD MENU

DVD INFORMATION

STATUS	ST-BY
MEDIA TYPE	DVD-RW
DISC FORMAT	SELF-PLAYING+DVD-VIDEO(OPT)
DVD PLAY ..

DVD EXPORT ..

CANCEL DVD EXPORT

DVD drive status

Type of media inserted (displayed as [–]

when no media inserted.)

Type of disc inserted (displayed as [–] when no disc inserted or

an unused disc is inserted.)

TIME/DATE

Sets whether the date/time stamp is to be recorded on images or not when writing is being carried out in the DVD-Video format.

DELETE METHOD

When data is being exported to a DVD-RW disc, all previous data on the disc will be deleted. This function specifies the

3.

Aborts the DVD export procedure.

3.Select [DVD EXPORT] with [S/T], and then press the [SET] button.

• The “DVD EXPORT” screen will be displayed.

DVD EXPORT

EXPORT FORM	SELF-PLAYING+DVD-VIDEO(OPT)
TIME DATE	ON	4.
ERASING METHOD	HIGH SPEED

method of deletion.

ALL:Deletes all data. This will require between thirty minutes and one hour for a 4x disc.

HIGH SPEED: Deletes the data at high speed (approximately two minutes.)

However, the data will not be completely erased.

5.Select [DURATION] with [S/T] keys, and then press the [SET] button.

• The [DURATION] setup screen will be displayed.

DURATION

DURATION.. 5.

4.Select your desired item with [S/T], and then change the setting with [–/+].

Settings

EXPORT FORM

01	2005 / 10 / 01 10 : 01			2005 / 10 / 01 10 : 59
	INPUT : 01 TYPE : ALL			2000MB [99]		DEL
02	2005 / 10 / 01 10 : 01			2005 / 10 / 01 10 : 59
	INPUT : 09 TYPE : ALL			2000MB [99]		DEL
03	20			20
	INPUT :	TYPE :			MB [ ]	DEL
	EDIT		CHECK		EXPORT

„Duration List Area

Duration List Area

Button Area

Self Playing + DVD-Video (OPT) format (gap fill-in):

The copy is made in both the self-playing format and the DVD-Video (gap fill-in) formats.

Self Playing + DVD Video (NO OPT) format:

The copy is made in both the self-playing format and the DVD-Video formats.

DVD-Video (OPT) format (gap fill-in):

The copy is made in the DVD-Video (gap fill-in) format. This can be played back on DVD players. It is designed so that gaps between images caused by a low number of frames per second are filled in, and it is played back at a speed of x1. This format cannot be played back on the VR-509.

The DURATION setting enables lists for a maximum of 99 periods to be set up. Lists for three periods are displayed on each screen. When the parameters for one period list have been completed, press the [T] key to continue with the setup of the next list. The list number in the DURATION LIST AREA will also be increased accordingly.

„Button Area

[EDIT]:	Used to amend the period list settings.
[CHECK]:	Used to calculate the capacity of the set lists.
	The number of chapters is also displayed.

[EXPORT]: Used to export the data to a DVD.

57