JVC VR-509E instruction manual Weekly Timer, Buttons Used for Procedures 2. to, Mode, Exec

Recording Camera Images

WEEKLY TIMER

1.Press the [MENU] button.

•Opens the menus in accordance with the instructions provided in MENU Screen Operations (page 17) in the sequence of “MENU” → “DETAIL REC” → “WEEKLY TIMER”.

2.	3.		4.	5.	6.
			WEEKLY TIMER
	START			END	MODE	EXEC	7.
SUN	* * : * *		* *	* * : * *	* * * *	* *
MON * * : * *			* *	* * : * *	* * * *	* *
TUE	* * : * *		* *	* * : * *	* * * *	* *
WED * * : * *			* *	* * : * *	* * * *	* *
THU	* * : * *		* *	* * : * *	* * * *	* *
FRI	* * : * *		* *	* * : * *	* * * *	* *
SAT	* * : * *		* *	* * : * *	* * * *	* *
DAY	* * : * *		* *	* * : * *	* * * *	* *
SUN	MON	TUE		WED THU	FRI	SAT	8.

2.Set the starting day.

3.Set the starting time.

4.Set the ending day.

5.Set the ending time.

6.Select the “MODE”.

7.Select “EXEC”.

8.Set the day of recording.

(By setting “DAY” for the starting day, it is possible to select

RECORD/NOT RECORD for every day of the week.) * Press the [CANCEL] button to delete the settings.

Buttons Used for Procedures 2. to 8.

[S/T/W/X]:	Selecting an item.
[–/+]:	Changing the value settings.

Settings

“START” Day

SUN, MON, TUE, WED, THU, FRI, SAT:

Sets the day on which recording is to start.

DAY: When recording daily. You can set the recording day of the week in combination with the [Recording Day], such as Mon through Fri., etc.

“START” Time

00:00 to 23:59: Sets the time at which recording is to start.

“END” Day

SUN, MON, TUE, WED, THU, FRI, SAT:

Sets the day on which recording is to end.

“END” Time

00:00 to 23:59: Sets the time at which recording is to end.

MODE

STANDARD, REC PATTERN 1 to REC PATTERN 9:

Selects the appropriate setting from among multiple recording settings. (See OPERATION SET on page 31)

EXEC
OFF:	Timer not executed.
ON:	Executes once, and then changes to “OFF”.
WEEK:	Executes the timer every week.

*When the starting day has been set to “DAY” note that only “ON” and “OFF” can be selected for this parameter. When “ON” has been selected, the time will be executed on a constant basis.

Recording Day

Sets the day of the week to be recorded when “DAY” has been selected for the starting day.

•The desired day of the week, “MON”, etc. will be recorded.

•Activates recording on “MON” or any other day displayed.

•[–] is displayed for days on which recording is not activated.

9.Press the [SET] button.

• A confirmation screen will be displayed.

10.Select [SAVE] with [W/X], and then press the [SET] button.

* If an incorrect parameter is set, a message will be displayed on screen and it will be impossible to move the cursor up or down or escape from the screen.

In this event, either press the [CANCEL] key and reset the parameter, or re-enter the correct parameter.

See page 39 for details on the operations required for timer recording and for the timer standby mode.

MEMO

•When the weekly timer and the date specification timer have both been set for operation, the priority is given to the date specification timer. (See page 28)

•When the program timer has been set to start up at the same time, the priority is given to the setting higher up the list.

•When multiple program timers have been set, the priority is given to the first time to start, and this setting is stored until time recording has finished.

However, if two or more program timers have been registered after recoding has finished, the priority is given to the setting higher up the list, regardless of the starting time.

38