JVC VR-509E instruction manual Skip jump, „ When Event is selected, „ When Time is selected

Explanations

Skip jump

There are 3 types of Skip Jump, namely “TIME”, “ALARM” and

“EVENT”, which can be specified in the search menu. Display

„ When “EVENT” is selected

the “SKIP MODE” in SKIP PLAY to execute SKIP button

• Pressing [SKIP] each time enables a jump to the start

setting. (Page 44)

position of recording (start of an event).

SKIP PLAY		Event1	Event2	Event3	Prealarm	Event4
			(Alarm1)			(Alarm2)
SKIP PLAY	OFF
SKIP MODE	TIME	Set
TIME JUMP	5MIN

„When “TIME” is selected

•Selecting “1HOUR” for Time Jump Setting enables jumps in 1 hour intervals every time the [SKIP] button is pressed. Jumps to the closest position from the specified time onwards if the time to jump to is not found.

10:30	12:00	12:15	13:00	15:00
Record	Stop	Record	Stop	Record
Event1		Event2		Event3

1HOUR 1HOUR

10:30 11:30 12:30 15:00

„When “ALARM” is selected

•Pressing [SKIP] each time enables a jump to the start position of alarm or sensor recording.

Event1	Event2	Event3	Prealarm	Event4
	(Alarm1)			(Alarm2)

•The display will jump to the starting position of the pre- alarm recording when pre-alarm recordings exist.

SKIP PLAY

If the [SKIP] button is pressed during playback with the [SKIP PLAY] setting on the [SKIP PLAY] menu temporarily set to “10 SEC”, the playback and skip operations will be repeated at intervals of ten seconds until no more relevant recorded images can be found.

Event 1	Event 2
10 sec.	10 sec.

106