JVC VR-509E instruction manual Setting up monitor output, Sequential

Viewing Live Camera Images

Setting up monitor output

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [MONITOR] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

SEQUENTIAL

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [MONITOR] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

MONITOR			SEQUENCIAL
BORDER COLOR	LIGHTGRAY		CAMERA 1	1 SEC
AUTO CHANGE ..			CAMERA 2	1 SEC
SPLIT PICTURE ..			CAMERA 3	1 SEC
BLIND CAMERA ..		2.	CAMERA 4	1 SEC
CAMERA TITLE ..			CAMERA 5	1 SEC	2.
ALARM REC DISP	OFF		CAMERA 6	1 SEC
VGA OUT	ENABLE		CAMERA 7	1 SEC
			CAMERA 8	1 SEC
			CAMERA 9	1 SEC
			SPLIT PICTURE	1 SEC

2.Select your desired item with the [S/T] keys, and then change the value of the setting with [–/+].

Settings

BORDER COLOR

Sets the brightness of the border lines for split screen displays.

BLACK/DARK GRAY/GRAY/LIGHT GRAY

*The brightness of the border lines for spot output will also change at the same time.

ALARM REC DISP

Sets the camera input to display when an alarm is detected.

OFF:	Does not change the display
FIXED:	Displays the camera input started with the most

recent alarm recording. When alarm recording is started for multiple camera inputs simultaneously, each of these are displayed for a period of one second, and then the camera input with the small number will be displayed.

SEQUENTIAL:

Displays all of the camera inputs sequentially for a period of one second each during alarm recording.

VGA OUT

DISABLE: Does not output images from VGA OUT.

ENABLE: Outputs images from VGA OUT.

3.Press the [SET] button.

• The confirmation screen will be displayed.

4.Select [SAVE] with the [W/X] keys, and then press [SET].

2.Select your desired item with the [S/T] keys, and then change the value of the setting with [–/+].

Settings

CAMERA 1 to 9

Sets the time at which each screen is to be switched.

1 SEC, 2 SECS, 3 SECS, 5 SECS, 10 SECS:

	Sequential display is carried out in accordance with
	the time set.
OFF:	Sequential display not performed.

SPLIT PICTURE

1 SEC, 2 SECS, 3 SECS, 5 SECS, 10 SECS:

Sequential display is carried out in accordance with the time set.

3.Press the [SET] button.

• The confirmation screen will be displayed.

4.Select [SAVE] with the [W/X] keys, and then press [SET].

* Depending on the monitor being used, there are cases where images will be distorted for a short period of time when switching between screens when display is being carried out in the QUAD PICTURE sequential mode.

24