Viewing Live Camera Images

Viewing Live Images with SPOT Output

It is possible to view live images with the SPOT output function. The following two methods for changing the display contents for SPOT output are available:

Changing SPOT output manually.

Changing SPOT output with terminal input on the rear panel.

Changing SPOT Output Manually

Press and hold the [SEQUENCE] button, and then press

the [SPLIT] button.

The SPOT LED will be illuminated, and the SPOT OUT SELECT mode will be activated.

Switch between the contents that are to be displayed for SPOT output using the same operations for monitor output with the use of the [1] to [9], [SEQUENCE] and [SPLIT] buttons.

Returning to the Monitor Output Selection Mode

Press and hold the [SEQUENCE] button, and then press

the [SPLIT] button.

The SPOT LED will be extinguished, and the MONITOR OUT SELECT mode will be activated.

Changing SPOT Output with Terminal Input on the Rear Panel

Make up the [SPOT1] and [SPOT2] terminals on the rear

panel for 400 ms or more.

The setup screen will change to SPOT output when the SPOT1 and SPOT2 terminals are input.

SPOT1

SPOT2

Changing screen

 

 

 

MAKE

OPEN

Displaying the next screen

 

 

 

OPEN

MAKE

Displaying the previous

screen

 

 

 

 

 

OPEN

OPEN

No change

 

 

 

„Displaying the next screen

When in the single screen mode: Switched alternately in the sequence 1 → 2 → 3 → ... → 9 → 1 →

When in the 4 DIVISION mode: Switched alternately in the sequence 4-A4-B4-C4-A ...

When in the 6 DIVISION and 9 DIVISION modes: Input is disabled.

„Displaying the previous screen

Switches the screens in the opposite sequence to that of “Displaying the next screen.”

„Amending the layout

Switched alternately in the sequence SINGLE SCREEN

→ 4 DIVISION → 6 DIVISION → 9 DIVISION → SINGLE SCREEN

26

Page 26
Image 26
JVC VR-509E instruction manual Viewing Live Images with Spot Output, Changing Spot Output Manually, SPOT1 SPOT2