JVC VR-509E instruction manual Enlarging Images Image Zoom, Audio OUT, Double-Size Enlargement

Playing Back Recorded Images

Enlarging Images (Image Zoom) AUDIO OUT

Images can be viewed in an enlarged mode.

Only single-screen displays can be enlarged.

*Enlarged displays are not possible when live images are being displayed.

1.Start playback (See page 40 “Playing Back Images”)

2.Press buttons [1] to [9] to select the camera input that is to be enlarged.

3.Press the [PLAY/PAUSE] button.

• Playback will be paused.

* It is possible to enlarge images during playback.

Double-Size Enlargement

4.Press the [1] to [9] buttons (the button pressed in 2.) for approximately two consecutive seconds.

• The range of enlargement will be displayed on the screen.

Sets whether to link the AUDIO 1 or 2 to a specified input or not. Or sets the input audio that was not specified for the AUDIO 1 link or AUDIO 2 link.

1.Press the [MENU] button.

•Opens the menus in accordance with the instructions provided in Changing MENU Settings (page 17) in the sequence of “MENU” → “DETAIL OPERATION” → “MONITOR” → “AUDIO OUT”.

	AUDIO OUT
AUDIO 1 LINK	(APPOINTMENT OFF)	2.
AUDIO 2 LINK	(APPOINTMENT OFF)
OTHER AUDIO	AUDIO 1

Green (x4 enlargement range)

Red (x2 enlargement range)

5.Move the range of enlargement with [S/T/W/X], and then press the [SET] button.

•The selected area will be displayed at double the size.

•Adjust the area being displayed with [S/T/W/X] if necessary.

Four-Fold Enlargement

6.Press the [+] button.

•The area will be displayed at four times the normal size.

•Adjust the area being displayed with [S/T/W/X] if necessary.

•Press the [–] button to return to the double-size display.

Ending the Enlarged Display

7. Press the [RETURN].

*If the [EVENT SEARCH] screen or the setup menu is displayed, the image zoom function will be ended and the image will return to its normal recorded size.

2.Select your desired item with [S/T], and change the setting value with [–/+].

Settings

AUDIO 1LINK

z(APPOINTMENT OFF):The link is not specified. CAMERA 1-9: AUDIO 1 output.

* Audio sound will be output when the single screen is displayed.

AUDIO 2LINK

z(APPOINTMENT OFF):The link is not specified. CAMERA 1-9: AUDIO 2 output.

* Audio sound will be output when the single screen is displayed.

OTHER AUDIO

OFF:	AUDIO not output.
AUDIO1:	AUDIO 1 is output.
AUDIO2:	AUDIO 2 is output.

3.Press the [SET] button.

• A confirmation screen will be displayed.

4.Select [SAVE] with [W/X], and then press [SET].

*Audio sound will not be output when the frame rate per second is set at 0.08 or 0.2. (See F.RATE on page 31)

*There are cases where the audio sound may break up when parts that contain many alarms are played back, and during multi-screen playback.

45