JVC VR-509E instruction manual Setting Camera Title, Deleting Characters

Setting Camera Title

1.Press the [MENU] button.

•Opens the menus in accordance with the instructions

provided in Changing MENU Settings (page 17) in the sequence of “MENU” → “DETAIL OPERATION” → “MONITOR” → “CAMERA TITLE”.

CAMERA TITLE

	CAM1:		Title area
		ALPHANUMERIC
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *		SYMBOL
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *

2.Press the [SEQUENCE] button to select the camera input that is to be set.

•The camera input selection will change whenever the [SEQUENCE] button is pressed.

3.Press the [SPLIT] button to select your desired type of characters for the input.

•The character types will change whenever the [SPLIT] button is pressed.

		CAMERA TITLE
	CAM1:
			ALPHANUMERIC	3.
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *			SYMBOL
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * *
				4.

4.Select the characters with [S/T/W/X], and then press the [SET] button.

•One character (word) will be entered into the camera title.

5.Repeat procedures 3. to 4. until all camera titles have been entered.

* Press the [–] or [+] keys to move the cursor on the title area backwards and forwards.

Maximum characters: 20

*Note that the on-screen display will overlay the operation status marker when the maximum character count is used. In this event, set the [PLAYBACK SET] setting on the [ONSCREEN MODE] screen to “OFF”. (See page 25)

Useful Features Using a PC

Deleting Characters

•To delete a character from the title, align the cursor with the relevant character and press the [CANCEL] button.

6.Press the [SEQUENCE] button after the camera title has been entered.

•The confirmation screen will be displayed.

7.Select [SAVE] and press the [SET] button to save the title.

•Proceed onto entering the next camera title.

*Press the [CANCEL] button to return the title to its original status.

8.Press the [RETURN] button to return to the previous menu.

CAUTION

•If a connected camera is reset to “DISCONNECT”, the camera title for that camera will no longer be displayed. The camera title will also not be displayed when images recorded previously are played back.

•When the camera title is amended midway through operations, the amended camera title will be displayed when images recorded prior to the amendment are played back.

47