JVC VR-509E Motion Detection with Freely Determined Sensitivity Levels, Manual Setup, Stop Level

Recording Camera Images

Motion Detection with Freely Determined Sensitivity Levels

When the [Motion Detection] value on the [OPERATION SET] screen is set at [USER], it is possible to set the sensitivity for

[DYNAMIC SENSITIVITY LEVEL], [TARGET AREA LEVEL] and [STOP LEVEL]. These settings have no effect if anything other than [USER] has been specified.

1.Press the [MENU] button.

•The [MENU] → [REC DETAIL] → [ALARM REC] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

ALARM REC
CAM NO		1	2.
DURATION		3MIN
PREALARM REC		10SEC
MOTION DETECT SET		8
DYNAMIC SENSITIVITY LEVEL (DEFAULT-8)			3.
STOP LEVEL	(DEFAULT-2)	2
TARGET AREA LEVEL	(DEFAULT-2)	2
MOTION DETECT AREA SET ..

Manual Setup

Use the manual settings if the desired level of detection is not attained with STANDARD or OTHER SCENE. These three parameter values should be determined after referring to [Table #1: Parameters for Each Scene] and [Table #2: Target Area Level and Detection Area Count] on page 35.

2.Select the camera input that is to be set up with [W/X].

3.Select your desired item with the [S/T] keys, and then change the value of the setting with [–/+].

Settings

DYNAMIC SENSITIVITY LEVEL

The level value for detection. The higher the value, the higher the sensitivity .

Setting Range:

1 (low sensitivity) to 10 (high sensitivity)

TARGET AREA LEVEL

The level value for the size of the subject to be detected. The higher the value, the more difficult it is to detect small motions.

Setting Range:

1 (small) to 10 (large)

STOP LEVEL

The offset value for the level of operation sensitivity. The larger the value, the more difficult to discontinue alarm detection.

Setting Range:

1 to 3

4.Press the [SET] button.

• The confirmation screen will be displayed.

5.Select [SAVE] with the [W/X] keys, and then press [SET].

36