JVC VR-509E instruction manual REC Detail, REC Pattern, Alarm REC

Changing VR-509 Settings Using a PC

COVERT CHANNEL

1.Click on “DISPLAY” → “COVERT CHANNEL” in that order.

2.

3.

2.Change the settings. (See page 27 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

REC DETAIL

1. Click on “FUNCTION” → “REC DETAIL” in that order.

2.

3.

2.Change the settings. (See page 30 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

REC PATTERN

It is possible to change the default recording parameters for

each mode on the same screen as the setup mode selection

screen.

1.Click on “FUNCTION” → “REC PATTERN” in that order.

2.

3.

4.

2.Select the mode to be set up.

3.Change the settings. (See page 31 for details)

4.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

*When the display is grayed out, it indicates that the camera input settings for the [INTRODUCTION SET-1] that correspond to the grayed out cameras have been set to [DISCONNECT]. (See page 20)

ALARM REC

1. Click on “FUNCTION” → “ALARM REC” in that order.

2.

3.

4.

2.Select the camera to be set up.

3.Change the settings. (See page 31 for details)

4.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

*When the display is grayed out, it indicates that the camera input settings for the [INTRODUCTION SET-1] that correspond to the grayed out cameras have been set to [DISCONNECT]. (See page 20)

84