Getting Started

Part Names and Functions (Front Panel)

 

 

5

6

7

 

 

 

 

 

 

 

OPEN/CLOSE

 

 

 

 

SPLIT

WARNING

 

REC

 

 

 

 

 

 

OPERATE

 

 

ALARM

REW

FF

1

 

 

 

 

 

 

 

 

 

SET

SEQUENCE

HDD

 

 

 

 

 

 

 

 

 

 

SPOT

 

 

2

TIMER/MODE

RETURN

 

LOCK

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO AUDIO

OUT OUT

FUNCTION

MENU

CANCEL

ALARM

REC/STOP

PLAY STOP

PLAY/PAUSE

SERIAL

 

 

RESET

 

 

 

3

 

 

 

 

 

SKIP

4

 

 

 

 

 

 

1[OPERATE] Button and Operate LED

Switches the main power on or off. The LED is illuminated when the OPERATE button is set to ON. (Page 16)

2[TIMER/MODE] Button

When the [TIMER/MODE (REC PATTERN)] setting on the [REC DETAIL] screen is set, the following is performed.

When the [TIMER/MODE (REC PATTERN)] setting is set at “PROGRAM TIMER”

Switches the timer ON. Press once again to switch the timer OFF. The LED is illuminated when the timer is set to ON. (Page 28)

When the [TIMER/MODE (REC PATTERN)] setting is set to other than “PROGRAM TIMER”

Changes the operation by switching between “STANDARD” “REC PATTERN 1 to 9”. The LED is illuminated when in the “REC PATTERN 1 to 9” modes. (Page 28)

*The [TIMER/MODE] button cannot be used when the menu is being displayed.

3VIDEO OUT / AUDIO OUT Terminals

Outputs live images and live sound when in the live image display mode.

Outputs recorded images and sound during playback. However, sound will not be output in the following cases:

When playing back still images, when running searches other than X1, and when playing back frame-by-frame.

When playing back recordings with the [NORMAL AUDIO REC]/[ALARM AUDIO REC] setting on the [DETAIL REC] screen set at OFF.

When a menu or search menu is displayed during playback.

5Keypad and Camera Input LED

„[1] to [9]

Selects the camera input when viewing live images and when playing back recorded images. The LED that corresponds to the selected camera input is illuminated. And also these buttons are used as numeric keys.

„[S/T/W/X]

Moves the cursor on the menus and playback menus. Changes the on-screen display position when live images (single screen) are displayed. (Page 46)

„[–/+]

Changes the values set on the menus.

„[SET]

Moves onto the next screen and sets the selected values on the menus.

Executes hard disk scanning, formatting and other functions.

„[RETURN]

Returns to the previous screen on the menus.

6[SPLIT] Button and LED

Switches live images and recorded images between the split screen and the single screen displays. The LED is illuminated when the screens are split.

7[SEQUENCE] Button and LED

Press this button to display live images in the single screen auto change mode or 4 division screen auto change mode. The LED is illuminated when in the AUTO CHANGE mode.

4SERIAL Port

Used to connect the communication control terminals on flash memories (sold separately,) additional hard disk drives (sold separately,) and UPS (sold separately.)

10

Page 10
Image 10
JVC VR-509E instruction manual Part Names and Functions Front Panel, „ Return