JVC VR-509E instruction manual Troubleshooting

Explanations

Troubleshooting

Problems Related to Error Code and Onscreen Display

			Refer
Onscreen Display		Cause and Recovery	to
			Page
“E-01 DETECTED.” *1, *2	•	System restarted due to error in the functioning of the hard disk.
	•	Continues operation with the intact hard disk.
	•	The data in the disconnected hard disk will not be recovered if the
		manual scan disk is executed.	–
	→ Switch the power supply off and then on again, and try the formatting or
		defrag functions once again.
	→ Consult your nearest JVC dealer.
“E-02 NO IDE 1 HDD”	•	Abnormality with hard disk operations (cannot be started up.)
“E-02 NO HDD”	→ Switch the power supply off and then on again, and try the formatting or		–
“E-02 IDE 1 FORMAT NG”		defrag functions once again.
“E-02 MIRRORING NG”	→	Consult your nearest JVC dealer.
“NO VIDEO IN** INPUT (E-03)” *2	•	No video input signals.
	→	Stop operations and check the connection.	P15
	→ Double-check settings in the “Instruction Set-1” Menu.		P20
	* Recording may fail if it is continued after the error message is displayed.
	Set the “CAMERA” setting to “DISCONNECT” in the “Instruction Set-1”
	Menu or eliminate the cause of the error immediately.
“E-05 DETECTED.” *1, *2	•	Error in the fan motor.	–
	→	Consult your nearest JVC dealer.
“E-06 DETECTED.” *1, *2	•	EEPROM error.
	→ If this error occurs due to alteration of a menu setting, turn the equipment
		off/ on and check the setting.	–
	→ If this error keeps occurring due to alteration of a menu setting or during
		operation, consult your nearest JVC dealer.
“E-07 DETECTED.” *1, *2	•	Codec 1 error. (Mostly used for recording and VR-509E playback)
	*	HDD/DVD playback, and recording onto the HDD will not be carried out	–
		normally if this is displayed.
	→ Consult your nearest JVC dealer.
“E-08 DETECTED.” *1, *2	•	Codec 2 error. (Mostly used for transmission and DVD trans-coding)
	*	USB still image capturing, DVD export processing and live/playback
		transmission to the network will not be carried out normally if this is	–
		displayed.
	→ Consult your nearest JVC dealer.
“E-09 DETECTED.” *1, *2	•	Error on one of the built-in hard disk drives. (This error is detected only
		when in the Mirroring Setting mode.)	–
	→ Consult your nearest JVC dealer.
“E-10 DETECTED.”	•	Abnormality with the DVD drive.	–
	→	Consult your nearest JVC dealer.
“POWER OUTAGE LOG IS	•	Displayed when a power outage occurs.
UPDATED.” *2	→	This is not an error. Press the [CANCEL] button to clear the message.	P54

*1 to *3: See the next page

96