JVC VR-509E instruction manual Monitor OUT, Auto Change, Indication, Division PIC

Changing VR-509 Settings Using a PC

It is possible to change the VR-509 settings with the use of a personal computer.

See the reference page for further details of the relevant parameters.

MONITOR OUT

1. Click on “DISPLAY” → “MONITOR OUT” in that order.

AUTO CHANGE

1. Click on “DISPLAY” → “AUTO CHANGE” in that order.

2.

3.

2.Change the settings. (See page 24 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

INDICATION

1. Click on “DISPLAY” → “INDICATION” in that order.

2.

3.

2.Change the settings. (See page 25 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

2.

3.

2.Change the settings. (See page 24 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

*When the display is grayed out, it indicates that the camera input settings for the [INTRODUCTION SET-1] that correspond to the grayed out cameras have been set to [DISCONNECT]. (See page 20)

DIVISION PIC.

1. Click on “DISPLAY” → “DIVISION PIC.” in that order.

2.

3.

2.Change the settings. (See page 25 for details)

3.Click on the [SAVE] button.

(Click on the [RESET] button to return to the setting values on the main unit.)

83