JVC VR-509E instruction manual Introduction SET-3

Installation and Preparation

Installation Settings (continued)

6.Press the [SET] button.

•The recording settings for the standard mode set on the “INTRODUCTION SET - 1” and “INTRODUCTION SET - 2” screens will be automatically set, and the “INTRODUCTION SET - 3” screen will be displayed.

INTRODUCTION SET-3

NORMAL REC F.RATE(ips) QLY

CAM 1	8.3	N
CAM 2	8.3	N
CAM 3	8.3	N
CAM 4	8.3	N
CAM 5	8.3	N
CAM 6	8.3	N
CAM 7	8.3	N
CAM 8	8.3	N
CAM 9	8.3	N

SET DETAIL

	ALARM REC
F.RATE(ips) (AUTO) QLY		M.DET
--	--		--
--	--		--
--	--		--
--	--		--
--	--		--
--	--		--
--	--		--
--	--		--
--	--		--
	FINISH			7.

INTRODUCTION SET - 3

7.Select your desired item with [S/T/W/X], and then press the [SET] button.

•Select “SET DETAIL” to change the recording settings for the standard mode. (See page 31)

•Select “FINISH” to end the INTRODUCTION SET procedure.

*All existing settings will be updated when these settings are saved after amendment.

21