Changing the Layout of the Split Screens

1.Press the [MENU] button.

Opens the menus in accordance with the instructions

provided in MENU Screen Operations (page 17) in the sequence of “MENU” → “LIVE PICTURE”.

The layout pattern that is set is displayed at the center of the screen.

First of all, the 4 DIV PATTERN A screen will be

displayed.

*The layout cannot be changed when in the playback mode.

4DIVISION-A

2.Press [W/X] to select the division layout required.

Changes sequentially in the order of 4 DIV PATTERN A

→ 4 DIV PATTERN B → 4 DIV PATTERN C → 6 DIV PATTERN → 9 DIV PATTERN → 4 DIV PATTERN A when [X] is pressed.

3.Press the [SET] button.

The sub-screen will be displayed within the blue border at the top left-hand side of the screen.

*The above is an example of QUAD PICTURE.

4.Press any of the [1] to [9] buttons.

• The camera input that corresponds to the number pressed will be displayed as a sub-screen inside the blue border.

• The blue border moves to the next sub-screen.

* The above is an example of QUAD PICTURE.

Viewing Live Camera Images

Press the [0] button to select the black screen.

Press the [SEQUENCE] button to return the blue border to the previous sub-screen and display the screen as it was prior to amendment.

5.Press the [SPLIT] button.

The split-screen selection screen will be displayed.

„Repeat procedures 2 to 5 to change the 6 DIV, 9 DIV or any other split-screen display layouts.

6.Press the [RETURN] button.

• A confirmation screen will be displayed.

A SET CONTENT WAS CHANGED.

DO YOU UPDATE THIS CONTENT?

SAVE CANCEL

*The above is an example of QUAD PICTURE.

7.Select “SAVE” with [W/X], and then press the [SET] button.

• Changes the layout of the split screen.

*Press [CANCEL] to return to the split-screen selection screen.

CAUTION

It is not possible to set 4 DIV A, 4 DIV B and 4 DIV C at the same location when setting up the layout for 4 DIV split screens.

23

Page 23
Image 23
JVC VR-509E instruction manual Changing the Layout of the Split Screens, Press W/X to select the division layout required