JVC VR-509E instruction manual Pass Code Setup, Displaying the Power Outage Time List and Log

Useful Features Using a PC

Pass Code Setup

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [MAINTENANCE] → [PASSCODE SET] screens will be

displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

PASSCODE SET
		2.
PASSCODE	NONE
MIS-INPUT OF PASSCODE	THREE TIME	4.

Displaying the Power Outage Time List and Log

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [MAINTENANCE] → [MAINTENANCE/LOG] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

•The TOTAL TIME and POWER OUTAGE TIME LIST will be displayed.

•The oldest log and the most recent three logs will be displayed for the POWER OUTAGE TIME LIST.

2.Select [PASSCODE] with the [S/T] keys, and then press [SET].

•The pass code confirmation/amendment screen will be displayed.

Please input the PassCode.

**** 3.

Press the SET Key.

Settings

PASSCODE

NONE: Displayed when no pass code has been set.

SET: Displayed when a pass code has been set.

3.Enter the pass code with the use of the ten-key pad, and then press [SET].

• The pass code will be set or amended.

*Enter the four characters of the passcode.

4.Select [MIS-INPUT OF PASSCODE] with the [S/T] keys, and then amend the value of the setting with [–/+].

Settings

MIS-INPUT OF PASSCODE

OFF: A warning will not be issued even when mis-input occurs.

ONCE, TWICE, THREE TIMES:

A warning is issued after mis-input occurs (consecutively) for the number of times set.

5.Press the [SET] button.

• The confirmation screen will be displayed.

6.Select [SAVE] with the [W/X] keys, and then press [SET].

MAINTENANCE/LOG
TOTAL TIME	********** h
POWER OUTAGE TIME LIST
PL - ****	**/**/**	** : **
PL - ****	**/**/**	** : **	2.
PL - ****	**/**/**	** : **
PL - ****	**/**/**	** : **
REBOOT		EXEC	3.
OPERATION LOG		EXEC
RECORD LOG		EXEC
DOWNLOAD		EXEC
UPLOAD		EXEC

Deleting the Power Outage List

2.Select the desired list with the [S/T] keys, and then press [CANCEL].

• The selected list will be deleted.

Displaying the Operation Log and Recording

Log

3.Select your desired item with the [S/T] keys, and then press [SET].

Settings

OPERATION LOG

Displays the operation log.

RECORD LOG

Displays the recording log.

CAUTION

There are cases where images recorded close to the times of power failures will not playback normally.

54