JVC VR-509E Adjusting Clocks with the NTP Server, Canceling NTP Server Registration

Useful Functions Using a PC

Adjusting Clocks with the NTP Server

If the times set in the system clocks of all VR-509 that are linked up to a multiple unit network are not synchronized, alarm searches cannot be performed accurately. It is therefore necessary to make sure that all system clocks are synchronized in accordance with the NTP server settings when multiple VR-509s are connected together.

Canceling NTP Server Registration

1. Click on “NETWORK” → “NTP SERVER” in that order.

2.

3.

Registering NTP Server

1. Click on “NETWORK” → “NTP SERVER” in that order.

2.

3.

4.

2.Click on the [YES] button.

3.Enter the NTP server address.

4.Click on the [SAVE] button.

•The system clock is synchronized with the NTP server.

5.Confirm the result of clock synchronization.

•The result of clock synchronization will be displayed.

When Clock Synchronization is Successful

•A message stating “TIME ADJUSTMENT WITH THE NTP SERVER IS VALID” will be displayed.

When Clock Synchronization Fails

•A message stating “ACCESS TO THE NTP SERVER FAILED” will be displayed.

•Check to verify that the NTP server address was correctly entered, and then repeat the registration procedure.

2.Click on the [NO] button.

3.Click on the [SAVE] button.

•The NTP server registration will be cancelled.

•A confirmation screen will be displayed.

MEMO

•The NTP server registration setting cannot be carried out when recording is in progress. It is possible to adjust the time during recording when NTP server registration has been set to [YES].

When time synchronization with the NTP server has been enabled, time adjustment will be carried out once every hour.

•See page 107 for details on the personal computer settings (Windows XP and Windows 2000) for when the NTP server function is in use.

78