121
RS-232C Interface
• ALARM MODE SENSE (D9H) [JVC-1] Returns the status data for the alarm recording settings.(Current operating mode status. The status at the time of
operations will be returned when in the timer mode.)
ALARM MODE SENSE Return Data• VR MODE SENSE (DAH) [JVC-1] Returns the status data for the operation settings.VR MODE SENSE Return Data
3. Details of the Commands (continued)
3.4. SENS Commands (continued)
D9H
TXD
RXD
1st byte 2nd byte 3rd byte 19th byte
Alarm Recording Settings (All)
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Alarm Recording Settings 1/2 (Camera 1)
Alarm Recording Settings 2/2 (Cameras 2 to 9)
Alarm Recording Settings 1/2 (Cameras 2 to 9)
Alarm Recording Settings 2/2 (Cameras 2 to 9)
bit 7 Not defined: “0” output
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0 Not defined: “0” output
bit 7 Not defined: “0” output
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0 “1” output with pre-alarm recording at [ON].
Recording time:
000 : 10 001 : 15 010 : 30 011 : 60 100 : 180 101 : 300
110: Manual
Recording time during passcode input errors:
00: NotRec, 01: 10 seconds, 10: 20 seconds, 11: 30 seconds
Recording time during emergency detection:
000: NotRec, 001: 30 seconds, 010: 1 minute, 011: 5 minutes,
100: 10 minutes, 101: 20 minutes, 110: Continual, 111: Manual
“1” output with audio recording during alarm operations at [ON].
“1” output with audio recording at [ON].
Recorded image mode: Smooth: “0”, High-resolution: “1”
3
Pre-sensor recording time:
00: 10, 01: 30, 10: 60 (seconds), 11: [OFF]
Recording resolution: 00 : L 01 : B 10 : N 11 : H
2
1
Alarm recording: Recording frame rate:
4/6/,,
,/18
bit 7
to 0 The contents are the same as 2BYTE.
5/7/,,
,/19
bit 7
to 0 The contents are the same as 3BYTE.
byte No. bit No.
0011: 0.8 0100: 1.7 0101: 2.5 0110: 5 0111: 8.3
1000: 12.5 1001: 25 1110: Auto 1111: NotRec
Not defined: “0” output
DAH
TXD
RXD
1st byte 2nd byte 3rd byte 6th byte
byte No. bit No.
Skip Settings
Not defined: “0” output
Continuous skip playback:
00: OFF, 01: 1 second, 10: 5 seconds, 11: 10 seconds
Time jump settings:
000: 1minute, 001: 5 minutes, 010: 10 minutes, 011: 30 minutes,
100: 1 hour, 101: 4 hours, 110: 1 day, 111: 1 week
Skip button settings:
00: Time, 01: Alarm, 19: Event, 11: Motion detection
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Operation Settings 1/5
Loop recording:
00: OFF, 01: Alarm lock, 10: All
Range of operation lock activation:
00: OFF, 01: Prohibit stop recording, 10: Prohibit all, 11: User settings
Power failure restoration operations:
00: OFF, 01: Maintained prior to power failure, 10: Enforced recording
Operation Settings 2/5
Not defined: “0” output
Not defined: “0” output
Recorded image storage period:
0000: 1 day, 0001: 3 days, 0010: 5 days, 0011: 1 week,
0100: 2 weeks, 0101: 3 weeks, 0110, 1 month, 0111: 3 months,
1000: 6 months
Operation Settings 3/5
“1” output with DVD operations at [ON].
“1” output with normal mode at [ON].
“1” output with monitor switch at [ON].
“1” output with amend settings at [ON].
“1” output with playback at [ON].
“1” output with stop recording at [ON].
Operation Settings 4/5
Audio 2 link destination:
0000: No specification, 0001: Camera 1; 0010: Camera 2;
0011: Camera 3; 0100: Camera 4; 0101: Camera 5; 0110: Camera 6;
0111: Camera 7; 1000: Camera 8; 1001: Camera 9
Audio 1 link destination:
0000: No specification, 0001: Camera 1; 0010: Camera 2;
0011: Camera 3; 0100: Camera 4; 0101: Camera 5; 0110: Camera 6;
0111: Camera 7; 1000: Camera 8; 1001: Camera 9
Operation Settings 5/5
Not defined: “0” output
Not defined: “0” output
Not defined: “0” output
“1” output with auto scandisk at [ON].
When no selection of audio output link specification:
00: OFF, 01: Audio 1, 10: Audio 2
1
2
4
Loop recording:
00: OFF, 01: Alarm lock, 10: All
5
3
6
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
“1” output with the operation lock release method at [Passcode].
“1” output with recording display lamp at [ON].
Not defined: “0” output
“1” output with mirroring operation at [ON].
Not defined: “0” output
Not defined: “0” output