Connecting to a PC

Setting up a Network for VR-509

Perform the initial setup procedure for the VR-509 while referring to the connected monitor screen.

1.Press the [MENU] button.

Opens the menus in accordance with the instructions provided in Changing MENU Settings (page 17) in the sequence of “MENU” → “DETAIL OPERATION” → “NETWORK”.

NETWORK

 

 

 

 

 

 

 

 

 

HOST NAME

vr509

 

 

METHOD

STATIC

 

 

IP ADRESS

192.168. 0. 10

 

 

 

NET MASK

255.255.255. 0

 

 

2.

 

 

DEFAULT GATEWAY

192.168. 0.254

 

 

 

DNS SERVER

0. 0. 0. 0

 

 

 

MAC ADDRESS

00:80:88:40:b0:00

 

 

2.Select [HOST NAME] with the [S/T] keys, and then press [SET].

• The host name entry screen will be displayed.

 

HOST NAME

 

 

 

 

 

 

 

 

***** ***** ***** ***** ***** *****

 

 

 

3.

***** ***** ***** ***** ***** *****

 

 

 

 

 

 

***** ***** ***** *****

 

 

 

 

 

 

 

 

 

 

 

4.

 

 

DECISION

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Select your desired character with the [S/T/W/X] keys, and then press [SET].

• A single character will be entered in the host name.

*Press the [–] or [+] keys to move the cursor backward and forward along the name.

Press the [CANCEL] button to delete the character in the name over which the cursor is located.

4.Select [DECISION] with the [W/X] keys, and then press [SET].

The screen will return to the [NETWORK] screen.

5.Select your desired item with the [S/T/W/X] keys, and then change the value of the setting with [–/+].

*The factory default settings are listed below.

METHOD: STATIC (DHCP servers cannot be used.)

IP ADDRESS: 192.168.0.10

NET MASK: 225.225.225.0

DEFAULT GATEWAY: 192.168.0.254

Consult with the network administrator for details on the settings required to connect the recorder to a LAN network.

6.Press the [SET] button.

The settings will be saved.

When a DHCP server has been set for METHOD, the IP address allocated by the DHCP server will be displayed the next time this menu is opened (cannot be amended.)

When [DHCP] has been set for METHOD, the IP address acquisition process will only be performed when the recorder is rebooted or when the setting is amended to an IP address. If the network is enabled after a certain period of time has passed since rebooting, amend the METHOD setting to something different, and then change it back to [DHCP] in order to acquire the IP address.

If setting acquisition from the DHCP server failed with [DHCP] set as the setup method, the previous STATIC IP values will be set.

* Press the [RETURN] button to return to the previous screen.

66

Page 66
Image 66
JVC VR-509E instruction manual Setting up a Network for VR-509, Select Host Name with the S/T keys, and then press SET