JVC VR-509E Rebooting the System, Hard Disk Recovery Feature, System will be rebooted

Rebooting the System

1.Press the [MENU] button.

•The [MENU] → [DETAIL OPERATION] → [MAINTENANCE] → [MAINTENANCE/LOG] screens will be displayed in this sequence in accordance with the [MENU Screen Operations] explained on page 17.

MAINTENANCE/LOG
TOTAL TIME	********** h
POWER OUTAGE TIME LIST
PL - ****	**/**/**	** : **
PL - ****	**/**/**	** : **
PL - ****	**/**/**	** : **
PL - ****	**/**/**	** : **
REBOOT		EXEC	2.
OPERATION LOG		EXEC
RECORD LOG		EXEC
DOWNLOAD		EXEC
UPLOAD		EXEC

2.Select [REBOOT] with the [S/T] keys, and then press [SET].

• The confirmation screen will be displayed.

*[REBOOT] cannot be executed during timer recording.

3.Press the [SET] button once again.

• The system will be rebooted.

Useful Features Using a PC

Hard Disk Recovery Feature

•The VR-509 is equipped with a function to notify the user of abnormalities on the hard disk when it is automatically rebooted.

•The automatic shut-off process will be executed if the system fails to recognize the hard disk or malfunctions occur three times during automatic rebooting.

•When there is a failure on the hard disk, it will restart and recovery automatically. The [E-01] error code will be displayed on the monitor screen after the automatic rebooting procedure has been carried out.

•Normal operations will be resumed when the automatic rebooting procedure has restored the malfunction. In this event, a message stating “SYSTEM REBOOTED TO CHECK HARD DISK” will be displayed on the monitor screen.

•Recording is not possible when the rebooting procedure is in progress.

•Automatic recovery is impossible in the event of fatal malfunctions that prevent the rebooting procedure from running.

55