JVC VR-509E instruction manual Searching with the Alarm List, Type EMG, Det

Playing Back Recorded Images

Searching with the Alarm List

1.Press the [PLAY/PAUSE] button.

• The “EVENT SEARCH” screen will be displayed.

			EVENT SERCH
	CONTINUOUS PLAYBACK					2.
	ALARM LIST SEARCH ..
	SEARCH DATE
* * / * * / 2 0 * * * * : * *
	SKIP SET ..
		Play with PLAY / PAUSE button.
				SKIP
		OLDEST EVENT			LATEST EVENT

2.Select [ALARM LIST SEARCH] with [S/T], and then press the [SET] button.

• The “ALARM LIST SEARCH” screen will be displayed.

	ALARM LIST SEARCH
	M / D / Y		H : M	3.
* * / * * / 20 * *		* * : * *
SEARCH CONDITION			START SEARCH	4.
	ALARM NO DATE/TIME		No TYPE

TYPE
EMG:	Emergency recording, Passcode error recording.
ALARM:	Alarm recording with the signal input terminal.
M.DET:	Alarm recording with motion detection.
ALL:	Emergency recording, passcode error recording and
	all alarm recordings.

*The search will be run for all alarm types when the [TYPE] parameter has not been specified.

7.Select [CLOSE] with [S/T], and then press the [SET] button.

• The search condition entry sub-window will be closed.

	ALARM LIST SEARCH
	M / D / Y		H : M
* * / * * / 20 * *		* * : * *
SEARCH CONDITION			START SEARCH	8.
	ALARM NO DATE/TIME		No TYPE

8.Select [START SEARCH] with [S/T/W/X], and then press the [SET] button.

• A list of search results will be displayed.

3.Select the year, month, day, hour and minutes with [W/X], and then change the values with [–/+].

•Proceed to 4. to change the search conditions.

•Proceed to 8. if the search conditions are acceptable.

4.Select [SEARCH CONDITIONS] with [S/T/W/X], and then press the [SET] button.

•The sub-window for entering the search conditions will be displayed.

ALARM LIST SEARCH

ALARM LIST SEARCH

M / D / Y		H : M
* * / * * / 20 * *		* * : * *
SEARCH CONDITION			START SEARCH
ALARM NO	DATE/TIME		No	TYPE
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**	***		*****
********	**/**/** **:**:**		***	*****

TYPE

EMG: Emergency recording

P.ERROR: Passcode error recording

ALTERM: Alarm recording with the signal input terminal.

M.DET: Alarm recording with motion detection.

9.

M / D / Y	H : M
* * / * * / 20 * *	* * : * *
SEARCH CONDITION	START SEARCH

ALARM NO	DATE/TIME	No	TYPE
CAMERA				5.
1. 2. 3. 4. 5. 6. 7. 8. 9. ALL
TYPE				6.
EMG ALARM M.DET		ALL
			CLOSE	7.

5.Select the camera input number to be retrieved with [W/X], and then press the [SET] button.

•A mark will be set beside the selected camera input number.

6.Select the alarm type to be retrieved with [S/T/W/X], and then press the [SET] button.

•A mark will be set beside the selected alarm type.

9.Select the date of the recorded image to be played back with [S/T], and then press the [SET] button.

• The alarm image selected will be played back.

*Press the [–] key to jump to the oldest of 100 items of data. If the number of items remaining is less than 100, the oldest list will be displayed in the center. Press the [+] key to jump to the most recent of 100 items of data. If the number of items remaining is less than 100, the most recent list will be displayed in the center.

*The cameras that are enabled for the [COVERT CHANNEL] setting will not appear in any search results. In this event, either make sure that the [SELECT COVERT] setting does not include [MONITOR OUT], or set [PLAY PERMISSION] to [ON] and run the search once again. (See page 27)

*It will jump to the position for starting pre-alarm recording when pre-alarm recording exists. (See page 105 “Prealarm Recording”)

42