JVC VR-509E instruction manual Still Picture Failed, Down Data Failed, UP Data Failed

Explanations

Troubleshooting (continued)

Problems with the DVD

If the following messages are displayed during DVD exporting or DVD playback, press the [CANCEL] button to delete the message,

and then check the cause of the problem.

			Refer
Onscreen Display		Cause and Recovery	to
			Page
“DVD export data retrieval was	•	No relevant retrieval data.
discontinued (D-01)”
“DVD export data retrieval was	•	The result of the search exceeds the disk capacity.	P57
discontinued (D-02)”
“DVD export data retrieval was	•	Search processing error.
discontinued (D-03)”
“DVD export data conversion	•	No relevant conversion data.
was discontinued (D-01)”
“DVD export data conversion	•	The result of the conversion exceeds the disk capacity.	P57
was discontinued (D-02)”
“DVD export data conversion	•	Conversion processing error.
was discontinued (D-03)”
“DVD export data disk making	•	Disk creation failed.
was discontinued (D-01)”	→	There is a chance that an error occurred on the relevant disk.
“DVD export data disk making	•	The inserted disk is not supported.	P57
was discontinued (D-02)”
“DVD export data disk making	•	Disk deletion failed.
was discontinued (D-03)”	→	There is a chance that an error occurred on the relevant disk.
“There is no file can be	•	The directory for list creation does not exist.
reproduced in DVD (D-01)”
“There is no file can be	•	The file for list creation does not exist.	P60
reproduced in DVD (D-02)”
“There is no file can be	•	List creation failed.
reproduced in DVD (D-03)”
Problems with Flash Memories

			Refer
Onscreen Display		Cause and Recovery	to
			Page
“STILL PICTURE FAILED”	•	The flash memory was disconnected during writing operations.
“DOWN DATA FAILED”	•	The flash memory is set for read-only operations.
	→ Disable the read-only function.		P62
	•	The flash memory does not have sufficient capacity.
	→ Increase the available capacity, or connect a new flash memory.		P63
	•	Sufficient capacity is available, but writing is not possible. (There are
		limits to the number of files a USB flash memory can store in the root
		directory.)
	→ Either store the new file in a sub-directory, or delete some of the other
		files.
“UP DATA FAILED”	•	The flash memory was disconnected during reading operations.
	• No menu setting data exists on the flash memory.
	•	The VR-509 version does not match up with the menu setting data	P63
		version.
	• The menu setting data file is damaged.

98