Hyundai HI4 operation manual 143938 *** Delay table

6. System setting

------------------------------------------------------------------------------------------------

6.2.1.5Setting the delay table

Outline

3:It sets the content about the delay signal of delay number that input in the attribution of the output signal.

Screen display

14:39:38 *** Delay table ***							A:0 S:4
Table		Count			ON delay	OFF delay
16	=	[	0	]	[ 0.00]sec	[	0.00]sec
17	=	[	0]		[ 0.00]sec	[	0.00]sec
18	=	[	0]		[ 0.00]sec	[	0.00]sec
19	=	[	0]		[ 0.00]sec	[	0.00]sec
20	=	[	0]		[ 0.00]sec	[	0.00]sec
21	=	[	0]		[ 0.00]sec	[	0.00]sec
22	=	[	0]		[ 0.00]sec	[	0.00]sec
23	=	[	0]		[ 0.00]sec	[	0.00]sec
24	=	[	0]		[ 0.00]sec	[	0.00]sec
25	=	[	0]		[ 0.00]sec	[	0.00]sec
Select and			Enter number. Press				[SET]
>[0 - 99.99]
					Previous	Next

Selection Method

①The user moves the cursor to the position where the user wants to change the attribution. You can use "Previous [PF3]", "Next [PF4]" if there is no signal as you want to change in the present screen.

②You press the [SET]Key after inputting the number about the On/Off delay with using the number key in the input frame.

Reference

„For example of the delay output)

ON delay: 1second, OFF delay: 0.5second

M ON			M OFF	0.5sec
		1sec		← →
	←	→ +	-------------------	+
--------------		+		+----------

„You must press the "Complete"[PF5] to save the changed content after finishing to change the output signal attribution, if press "Cancel" Key you can't save the changed content.

----------------------------------------------------------------------------------------

6 - 19