Hyundai HI4 operation manual Line number edit, Set, Line number is reflected on the edit frame

8. Programming

------------------------------------------------------------------------------------------------

8.6 Line number edit

Step number is created at the same time when MOVE statement (step) is input. Line number is available within 1∼9999 and the input method is that it is input line number in the address area.

At first, move a cursor to the address area,

14:39:38 *** M A N U A L ***

A:0 S:H4

T0

PNo:100[*]__ SNo/F:4/1

Spd:100.00

S1

MOVE P,S=100%,A=0,H=1

S2

MOVE P,S=30cm/min,A=0,H=1

WEAVON WEV#=1

ARCON ASF#=1

S3

MOVE L,S=30cm/min,A=0,H=1

ARCOF AEF#=1

WEAVOF

S4

MOVE P,S=30cm/min,A=0,H=1

END

Select PF menu

>

Service

Blk.Edit

Rel.WAIT

Cond Set

and then press [SET] after inputting line number.

[1] [0] [SET]

14:39:38 *** M A N U A L ***

A:0 S:H4

T0

PN:100[*]__ S/F:4/1

Sp:100.00

S1

MOVE P,S=100%,A=0,H=1

S2

MOVE P,S=30cm/min,A=0,H=1

10

WEAVON WEV#=1

ARCON ASF#=1

S3

MOVE L,S=30cm/min,A=0,H=1

ARCOF AEF#=1

WEAVOF

S4

MOVE P,S=30cm/min,A=0,H=1

END

Select PF menu

>

10

Service

Blk Edit

Rel WAIT

Cond Set

Line number is reflected on the edit frame.

When a cursor is in address area in a instruction statement with line number, because the line number is highlighted in input frame, change is that inputting the line number like input, and input has the same method with change method, and in case of delection, the line number is deleted when you press [SET] after deleting by using a backspace[BS].

----------------------------------------------------------------------------------------

8 - 17