Hyundai HI4 Apply hot edit, First ?, Service System, Applying initiated CALLing info Escape

3.Service menu

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

ORIGINAL PROGRAM is copied to the TEMP1 file and be modified by user. When user push the " OK" [PF5] key , TEMP1 is copied to TEMP2 and displays the request of Accept. Accept of ORIGINAL PROGRAM is proceeded by exchanging files between TEMP2 and

ORIGINAL PROGRAM.

Accept are occurred to the following chart.

	Description		Accept time
Job	Practice the job	Stating	time of	Re-cycle
	Job requested by CALL	(Accept	the all	files)
process
ing
	The other Job	On the	request

Hot Edit cannot operates except running mode, But when the Stop function occurs by the user's request or other interrupt, it is possible to Request of Accept. But it is impossible to proceed Accept unless it starts by Re-cycle request.

When user push the [CMD] or [SET], [Delete] key in manual mode, the message occurs as follows. Do you want to proceed the Hot Edit at first? [Y/N]

Apply hot edit, First ?			[YES/NO]
>
Service	System	Rel.WAIT	Cond Set

When you select the (YES), It is accepted. When you select the (NO), cancel the accept request and delete the TEMP2 file. If you select the Accept, it doesn't means new start of re-cycle. the present Job and content of job in stack are totally changed When you call the program, the problem can be occurred. The Call stack is cleared and the following message occurs.

Applying initiated CALLing info.

>

Escape Apply OK

When you operate the PLAY in the condition of Call Stack cleared, it can be abnormal operation of CALL function.

----------------------------------------------------------------------------------------

3 - 40