Hyundai HI4 operation manual Welding END Condition EXE. AT AEF#=, Condition File

9. Quick Open Function

------------------------------------------------------------------------------------------------

9.4 WELDING END CONDITION - EXE. AT AEF#=

OUTLINE

When a cursor is at ARCOF AEF#= instruction line, if you press key, edit screen is displayed as followings.

Entry screen

14:39:38** Arc		Condition File **A:0 S:4
CRATER	CONDITION FILE
Cond No	: [		1		] (chg:[Sft]+[Up/Dwn])
Comment	: [Crater Condition 1 ]
Vol Confirm : <				Done			,Not Done>
StickRecover: <				Ok		,No>
Current	:	[180] A
Voltage	:	[20] V
Creater	Time:	[0.10]sec

Out Method : <constant,Slope>

Gas Postflow: [		2.0] sec
Select and Enter		number. Press [SET]
>
Aux Cond	Welder		Save

Screen contents

„Con. No. : It assigns the welding condition No. (32 conditions are available.)

„Explanation : It records explanation about usage of the welding condition.

„Voltage check : It sets what you checked whether the control way is unification or individuation.

„Auto wire stick release : In case that wire stick is happened after ARCOF is output, it decides whether using the auto wire stick release function or not.

„Output current : It inputs welding current value to output at the welding power machine.

„Output voltage : It inputs welding voltage value to output at the welding power machine.

„Condition holding time : It inputs the time when current and voltage of welding end condition holds.

„Output way : When the arc welding ends, it selects whether you make it steep or unchangable

----------------------------------------------------------------------------------------

9 - 7