Hyundai HI4 operation manual 143938*** Assign Outpur No *** A0 S4, Form Previous

6.System setting

------------------------------------------------------------------------------------------------

6.2.1.10.4Output signal assignment

Outline

It sets each signal group unit how you will map each output.

Screen display

14:39:38*** Assign Outpur No *** A:0 S:4

Assign Output No				to Fbus Data
0	O1	-	O8	->	[	0	]	Fbus_0
1	O11	-	O18	->	[ 1]			Fbus_1
2	O21	-	O28	->	[ 2]			Fbus_2
3	O31	-	O38	->	[ 3]			Fbus_3
4	O41	-	O48	->	[ 4]			Fbus_4
5	O51	-	O58	->	[ 5]			Fbus_5
6	O61	-	O68	->	[ 6]			Fbus_6
			Page 1/4
Set	Fbus element No to map to output
>[0	- 31]
All	Form		Previous					Next	Done

„Please press [SET]key after inputting Fbus data that should use the output to be mapped in the standard output signal.

Reference

„The first data of Fbus data is redeployed if press "ALL Form"[PF1.].

„If you press “ Done” [PF5] key, Save the changed information. If press [CANCEL] key , Cancel them.

Caution

⑴Do always in the off status in case of not building in BD470. If you put in the On status without building in BD470, All of the I/O function don't work with occurring the error in the controller.

----------------------------------------------------------------------------------------

6 - 30