Hyundai HI4 Second2 servo gun parameter, Case of selecting the next screen, Offset mm, Max Fix

6. System setting

------------------------------------------------------------------------------------------------

6.4.1.2Servo gun parameter

Outline

It is set to do the spot welding by using the servo gun.

The additional axis should be registered to the servo gun and in case of making out the machine constant file, it is set to the initial value. If it is necessary, please change it according to the gun or the welding method so forth.

Please refer to the servo gun function manual for more precise contents.

Screen display

14:39:38* Servo Gun Parameter * A:0 S:4

1:First(1) servo gun parameter

2:Second(2) servo gun parameter

Use [Number]/[Up][Down] and press [SET].

>

Previous Next

„In case of using the multi-gun, it should be set on two items of the first and second servo gun parameter.

If advanced to the first servo gun parameter, the following screen is displayed.

▶In case of selecting the next screen

14:39:38** Servo Gun 1 Param.**A:0 S:4
Large stroke	(mm)	= [	90	]
Small stroke	(mm)	= [	20]
Move tip clearance (mm)		= [	10.0]
Fix tip clearance (mm)		= [	2.0]
Max tip consumption (mm)		= [	10.0]
Tip change consumption (mm)		= [	6.0]
Gun arm bent	offset (mm)	= [	0.00]
Gun arm bent	per 100Kgf (mm)= [		0.31]
Fix tip bent	rate (%)	= [	100]
Pressure match rate (%)		= [	5]
Pressure fault check time(s)= [			3.0]

----------------------------------------

Max move tip consumption(mm)= [					0.0	]
Max	fix	tip consumption (mm)= [			0.0]
Move tip change consumption			=	[	0.0]
Fix	tip	change consumption	=	[	0.0]

Enter number and press [SET]

>

Previous Next Complete

----------------------------------------------------------------------------------------

6 - 71