Hyundai HI4 Welding Auxiliary Condition AUTO. Wire Stick Release, Auto Stick Recovery, 20.0

9.Quick Open Function

------------------------------------------------------------------------------------------------

9.7 WELDING AUXILIARY CONDITION - AUTO. WIRE STICK RELEASE

Outline

If you select “ auxiliary condition” [PF1] at welding end condition, automatic wire stick release setting screen is displayed as followings.

Entry screen

14:39:38**		Arc Condition File **A:0 S:4
ARC AUXILIARY CONDITION FILE
<AUTO STICK RECOVERY>
Repeat	:	[1] Times
Current :		[ 0] A
Voltage	:	[	20.0	] V
Delay	:	[0.30] sec
Select and		Enter number. Press [SET]
>[0.0 - 200.0]
AEF					Save

Screen contents

„Number of times : It inputs the maximum repeating times of wire stick release.

„Current : It inputs the output value of welding current during a wire stick release.

„Voltage : It inputs the output value of welding current during processing a wire stick release.

„Delay time : It inputs the time when a wire stick release condition outputs.

Reference

„Move a cursor on the content which you want to change, and press [SET] and inputting numerical number. The setting value will be changed. You should press "completion"[PF5] to save the changed value.

----------------------------------------------------------------------------------------

9 - 14