Hyundai HI4 Weaving Condition File, Select and Enter number. Press SET Previous Next Save

9. Quick Open Function

------------------------------------------------------------------------------------------------

9.8 WEAVING CONDITION FILE

Outline

If you press key, when there is a cursor in WEAVON WEA#= instruction line, the edit screen is displayed as followings.

Entry screen

14:39:38** Arc Condition File **A:0 S:4

WEAVING CONDITION				FILE
Cond No: [1]
Mode	: <	Single	,Triangle,L>
Freq. : [2.5]Hz (0Hz: Moving Time)
Pattern:
Vertical			[10.0]mm
Horizontal			[10.0]mm
Angle			[90.0]deg
Forw Angle:			[	0.0]deg
Segment			Moving Time
1	=>			[0.10]	sec
2	=>			[0.10]	sec
3	=>			[0.10]	sec
4	=>			[0.10]	sec
Segment			Timer
1	=>			[0.00]	sec
2	=>			[0.00]	sec
3	=>			[0.00]	sec
4	=>			[0.00]	sec

Select and Enter number. Press [SET]

>

Previous Next Save

Screen contents

„Condition number : It is the number of weaving condition. You can input the number directly or move to previous or next number by using [ENABLE]+[↑ ] [↓ ].

„Weaving type : It supports simple harmonic motion, triangle wave and L type wave.

„Frequency : If 0, it selects moving time. Frequency can be set within 0.1∼5.0Hz.

„Basic pattern

(1)Vertical direction : Ver. distance can be input within 1.0∼25.0mm.

(2)Horizontal direction : Hor. distance can be input within 1.0∼25.0mm.

(3)Angle : Angle can be input within 0.1∼180.0 degree.

----------------------------------------------------------------------------------------

9 - 15