Hyundai HI4 Setting the Earlier output Outline, Sig Time, High do, Sec Low GO High, 00sec

6. System setting

------------------------------------------------------------------------------------------------

6.2.1.8Setting the Earlier output

Outline

Usually, the DO signal output after getting to the step, You can use this function when you output DO signal before getting to the step by setting this function.

Screen display

14:39:38 *** Earlier output ***							A:0 S:4
Sig			Time		Low	DO	High DO
DO	=	[	0.00	]sec	[	0]	[ 0]
					Low GO		High	GO
O-bype=		[	0.00]sec		[	0]	[	0]

Select and Enter number. Press [SET]

>[1 - 99.9]

Screen description

„Earlier out time : It sets the first out time of group output signal( GO) or each output signal before getting to the step.

„DO lower number : This is a first number of each output signal(DO) that is going to do first out.

„DO upper number : This is a last number of each output signal(DO) that is going to do first out.

„GO lower number : This is a first number of each output signal(GO) that is going to do first out.

„GO upper number : This is a last number of each output signal(GO) that is going to do first out.

Reference

„But, This first out function can't apply when the step go and back in manual mode.

„If you press “ Complete” [PF5] key, save the changed information. If press [CANCEL] key , Cancel them.

----------------------------------------------------------------------------------------

6 - 23