Hyundai HI4 operation manual 143938 *** Pulse table, Enter number. Press

6.System setting

------------------------------------------------------------------------------------------------

6.2.1.4Setting the Pulse table

Outline

3:It sets the content about the pulse signal of pulse number that input in the attribution of the output signal.

Screen display

14:39:38 *** Pulse table ***							A:0 S:4
Table		Count			ON time	OFF time
1	=	[	0	]	[ 0.00]sec	[	0.00]sec
2	=	[	0]		[ 0.00]sec	[	0.00]sec
3	=	[	0]		[ 0.00]sec	[	0.00]sec
4	=	[	0]		[ 0.00]sec	[	0.00]sec
5	=	[	0]		[ 0.00]sec	[	0.00]sec
6	=	[	0]		[ 0.00]sec	[	0.00]sec
7	=	[	0]		[ 0.00]sec	[	0.00]sec
8	=	[	0]		[ 0.00]sec	[	0.00]sec
9	=	[	0]		[ 0.00]sec	[	0.00]sec
10	=	[	0]		[ 0.00]sec	[	0.00]sec
Select and			Enter number. Press				[SET]
>[1 - 100]
					Previous	Next

Selection Method

① The user moves the cursor to the position where the user wants to change the attribution of the output signal. You can use "Previous [PF3]", "Next [PF4]" if there is no signal as you want to change in the present screen.

②You press the [SET]Key after inputting the number about the On/Off time, frequency with using the number key in the input frame.

Reference

„For example of outputting the pulse)

Frequency: 3,	ON time: 1second,	OFF time: 0.3 second
1second 0.3second

←→ ← →

+	----------+	+	----------+	+	----------+
---+	+--	+	+--	+	+--

„You must press the "END"[PF5] to save the changed content after finishing to change the output signal attribution, if press "CANCEL" Key you can't save the changed content.

----------------------------------------------------------------------------------------

6 - 18