Hyundai HI4 operation manual System setting

6. System setting

------------------------------------------------------------------------------------------------

pressurization table can set the current value on the pressurization of 5 unit choosed freely.

Reference

⑴Certainly, set a data before using the servo gun function.

⑵In case that the set point is improper, even if the "PF5"[Completion] key is pushed, it isn't changed. Therefore, please set to proper value again as follows.

-The large open stroke should be set to being within the range of soft limit.

-The small open stroke should be set to being smaller value than that of

the large open stroke.

-The movable electrode clearance should be set to being smaller value than that of the small open stroke.

⑶In the multi-gun, it is possible in motor-off to register the pedestal gun. but in case of being set together with the robot gun, it can't do motor-on. therefore you should select either all of the robot guns or all of the pedestal guns.

⑷The number of pedestal gun coordinate system is effective only in case of that the gun type is a pedestal gun.

⑸The pressurization force-electric current table should be set by measuring with the pressurization force gauge because it can be different according as whether the movable electrode is a gravity direction or half-gravity direction.

⑹Please refer to the specification manual on servo gun function for the precise contents of parameter.

----------------------------------------------------------------------------------------

6 - 75