Hyundai HI4 operation manual 143938 *** Assign Input No *** A0 S4, DI1, DI9, Previous Next Done

6. System setting

------------------------------------------------------------------------------------------------

„If press [SET]key after the standard [0] input the input source of the screen that is displayed in the present teach pendent change <STANDARD>.

„If press [SET]key after the field bus [1] input the input source of the screen that is displayed in the present teach pendent change <Fbus>.

⑶The present setting item will save if press “ Done” [PF5], it will not save if press [CANCEL].

6.2.1.10.3Input signal assignment

Outline

It sets each signal group unit how you will map each input.

Screen display

14:39:38 *** Assign Input No *** A:0 S:4

Assign Input No to Fbus Data
0	DI1 -	DI8	<-	[	0	]	Fbus_0
1	DI9 -	DI16	<-	[ 1]			Fbus_1
2	DI17 -	DI24	<-	[ 2]			Fbus_2
3	DI25 -	DI32	<-	[ 3]			Fbus_3
4	DI33 -	DI40	<-	[ 4]			Fbus_4
5	DI41 -	DI48	<-	[ 5]			Fbus_5
6	DI49 -	DI56	<-	[ 6]			Fbus_6

Page 1/4

Set Fbus		element No to map		to input
>[0	- 31]
All	Form		Previous	Next	Done

„Please press the [SET] after inputting the Fbus data that should use the input to be mapped as the input signal.

Reference

„The first data of Fbus data is redeployed if press "ALL Form” [PF1].

„If you press “ Done” [PF5] key, Save the changed information. if press [CANCEL] key , Cancel

them.

----------------------------------------------------------------------------------------

6 - 29