Hyundai HI4 143938 ** do Sig attribute ** A0 S4, DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 DO9

6. System setting

------------------------------------------------------------------------------------------------

6.2.1.3The attribution of Output signal

Outline

It decides the attribution of output signal. If the number of output signal is normal "0", the number 1 to 15 output the pulse signal to be assigned in the pulse signal table, and the number 16 to 30 output the delay signal assigned in the delay signal table.

Screen display

14:39:38 ** DO Sig attribute ** A:0 S:4

DO1	= [	0	]	DO2	= [ 0]
DO3	= [ 0]			DO4	= [ 0]
DO5	= [ 0]			DO6	= [ 0]
DO7	= [ 0]			DO8	= [ 0]
DO9	= [ 0]			DO10	= [ 0]
DO11	= [ 0]			DO12	= [ 0]
DO13	= [ 0]			DO14	= [ 0]
DO15	= [ 0]			DO16	= [ 0]
DO17	= [ 0]			DO18	= [ 0]
DO19	= [ 0]			DO20	= [ 0]
DO21	= [ 0]			DO22	= [ 0]

Select and Enter number. Press [SET]

[Normal[0]; Pulse[1-15]; Delay[16-30]]

Previous Next

Selection Method

①The user moves the cursor to the position where the user wants to change the attribution of the output signal. You can use "Previous [PF3]", "Next [PF4]" if there is no signal as you want to change in the present screen.

②You press the [SET]Key after inputting the number in the input frame with using the number key.

Reference

„You must press the "Complete"[PF5] to save the changed content after finishing to change the input signal logic, if press "Cancel" Key you can't save the changed content.

----------------------------------------------------------------------------------------

6 - 17