Hyundai HI4 operation manual Yes, Press SHIFT+-- Key Previous Next Complete

6. System setting

------------------------------------------------------------------------------------------------

„1: If the pattern register 1 is selected, the next screen is displayed.

14:39:38 ** Pattern Register						** A:0 S:4
#Palletize pattern Reg.No 01
Not use/use				=[	0		]
Palletize/Depalletize				=[	0]
Pattern number(CNT/layter)=[					1]
Subpattern number				=[	1]
Total layter number				=[	1]
Even layer rotation				=<
						,1,2>
Stacking	direction			=<		,1,2,3>
Tool	=<	Fork	,Vaccum> User			coord =[ 0]

Basic Workpiece=[ 0.1][ 0.1][ 0.1] Pallet slope =[ 0.00][ 0.00][ 0.00]

----------------------------------------

#Palletize	pattern Reg.No			01
Slip compensation by			work	weight
St.layer=[	1	]Shift(mm) =[				0.0]K=[ 1]
Tier sheet	insertion		function
Tier sheet	insertion		=every [				0]tier
The last tier sheet				=<	NO		,YES>
Thickness of tier sheet				=[			0.1]mm

Press [SHIFT]+[<-][->] Key

>[0 - 1]

Previous Next Complete

Contents of the screen

„Disuse/Use : It decides whether to use the present pattern register or not.

„Palletizing/Depalletizing : It decides whether to execute the palletizing or depalletizing.

„Pattern number(the number/first stage) : The pattern number is the total work object of one stage. There are patterns of 25 unit on the basis of the number of total work object which can stack on one stage. It sets the wishful pattern number.

„Sub-pattern number : It divides the pattern of other shape classified by the pattern number. There are sub-pattrens of 6 unit which the loading shape and size are different each other. It sets the sub-pattern number of wishful shape.

„Total stage number : It sets the total stage number to stack.

„Even number stage loading rotative angle : It is to load all of the pattern by rotating properly in the even number stage to prevent the work object from falling down.

----------------------------------------------------------------------------------------

6 - 87